SR3604-35 – Aromatic Polyamide-imide

Download Documentation

SR3604-35 – TDS

SR3604-35 – SDS

Request a Sample

Specifications

Test

Specification

Appearance

Viscous Brown Liquid

Viscosity

2800-3600 mPas @ 23°C

Non-volatiles

35 – 37%

Density

~1.1 g/mL @ 23°C

Certifications & Registrations

ISO 9001:2015 is a globally recognized standard for quality management systems. It is a framework encompassing all aspects of business operations, from leadership and planning to support and performance evaluation. ISO 9001:2015 certified through DQS; BR#: 10016110 QM15.

Ask us about our Reach certification status

REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) compliance is for the manufacturers and importers of chemicals in the EU. Ask us if this chemical complies with regulations and is registered with the European Chemicals Agency (ECHA), which aims to ensure a high level of protection of human health and the environment against harmful substances..

SR3604-35 – Aromatic Polyamide-imide

Applications

SR3604-35 is typically used in the following applications:

Temperature resistant coatings
Binder for high temperature resistant fiber reinforced plastics
Bonding agent for high temperature applications up to 240°C
FDA compliant coatings

The excellent chemical resistance of these polymers leads to applications in container coatings, “non-stick” cookware, electronics, and other areas. Coatings can be produced from SR3604-35 that meet requirements of FDA regulations 177.2450 and can therefore be used in the manufacture of cookware coatings.

Solvent System

The solvent in this material is N-ethylpyrrolidone; further thinning if required should be carried out with N-ethylpyrrolidone. This solvent can also be used for cleaning of equipment as necessary.

Processing

SR3604-35 is supplied as a solution; care must be taken to enable the solvent to be removed slowly to avoid blistering of the film. During curing, the temperature of the object should be increased slowly up to the final cure temperature to avoid blistering of the coating due to final release of solvent. Final cure temperature of >220°C is required.

The solvent system for SR3604-35 is hygroscopic,i.e., will slowly absorb moisture from the atmosphere. 1-2% water content should not affect performance, but higher levels will lead to thickening of the product and difficulty in obtaining an acceptable impregnation. For this reason the applicator tank should be closed.

It is advised not to mix used material with unused product for storage, although topping-off the process tank with fresh material is acceptable.

Handling

Information on the safe handling of this material is available on the relevant Safety Data Sheet (SDS). Further information is available on request.

Regulatory Information

Specific local inquiries should be directed to Cymer- Dayton, LLC. To the best of our knowledge this product meets the
definition of a polymer under REACH, and its components are preregistered as substances. The material, or components, is either on the TSCA inventory list or is exempt from the requirement to be listed.

Committed

The foundation for all partnerships is the relationships we develop and foster with our customers. The customer’s success is our primary objective, and that success is built on a deeply-rooted commitment, at all levels of the company, to safety, quality and success in all aspects of our work.

Download Documentation

SR3604-35 – TDS

SR3604-35 – SDS

Request a Sample

Specifications

Test

Specification

Appearance

Viscous Brown Liquid

Viscosity

2800-3600 mPas @ 23°C

Non-volatiles

35 – 37%

Density

~1.1 g/mL @ 23°C

Certifications & Registrations

Ask us about our Reach certification status

SR3604-35 – Aromatic Polyamide-imide

Who We Are

Contact Sales

Specialty Polymers & Polyamide-Imide

Custom Chemical & Toll Manufacturing

Specialty Organics

Locations

Ⓒ 2023 - All Rights Are Reserved